RAID6 (Double Xor) Presets
(Available on Restorer Ultimate PRO and Restorer Ultimate PRO Network only)
Restorer Ultimate allows you to create and process RAID 6 Double Xor layouts with the following presets:
In addition you may create your own RAID 6 configurations.
Creating a RAID 6 (Double Xor) object from a preset:
We will use the EVENODD preset as an example.The RAID components are the images RAID62X1.bin, RAID62X2.bin, RAID62X3.bin, RAID62X4.bin, RAID62X5, and RAID62X6.bin on the Device/Disk list.
To create a RAID 6 Double Xor object
Note: Components should be placed in the same order and the offsets should be specified as they were in the original volume set. If this order is incorrect, you must change it by using the Move Up and Move Down buttons.
If a component from the objects is absent (due to hardware failure, for example), you can add a "missing disk" to re-construct the RAID. The missing disk should be placed in the same order as in the original RAID structure.
Turning Disks On-Line and Off-Line on-the-fly
You may turn the objects in the virtual RAID or volume set on-line and off-line by selecting/clearing the On checkbox on the Create Virtual RAID dialog box. It may be useful, for example, if you need to see which disk is non-actual in a RAID5 or 6.
Actually, when you turn an object off-line, Restorer Ultimate substitutes it with a Missing Disk or Empty Space object.
Note: Restorer Ultimate does not write anything real on the disk. A missing disk is a virtual object that does not affect actual data on the drive.
Specify Blocks order (EVENODD for our case) for the virtual RAID 6. You may select it on the Blocks order drop-down menu. Also the RAID block size and Offset (in sectors) parameters must be set.
If the those parameters are not correct, data on the parents will not be damaged, but they cannot be recovered.
You may automatically find parameters for RAID 5 and 6. See the Finding RAID Parameters help page for details.
If Restorer Ultimate detects a valid file system on this RAID object, a partition object will appear on the Device/Disk list.
Note: You may check how correctly you have reconstructed the original volume set or RAID. Find a file and preview it. If the file appears correct, you have created a correct RAID layout. The file should be large enough. For example, it should have size equal or larger to Block size*(Number of disks-Number of parity disks) for RAID 5 or 6.
The Description Files for RAID Configurations topic shows the RAID description file for this RAID configuration.